Advanced Copy Settings; Monitoring Setup; Event Notification Setup - Fujitsu Eternus DX60 User Manual

Chapter 7 Setup

7.4 Monitoring Setup

7.3.3

Advanced Copy Settings

For settings and operations to use the Advanced Copy functions, refer to "ETERNUS DX60/
DX80/DX90 Web GUI User Guide" or "ETERNUS DX60/DX80/DX90 CLI User Guide".
For operation settings when using ETERNUS VSS Hardware Provider, refer to the ETERNUS
VSS Hardware Provider manual.
Refer
7.4 Monitoring Setup
Perform the ETERNUS DX60/DX80/DX90 monitoring setup if required.
Refer
7.4.1

Event Notification Setup

Set how to notify of an event and its level when a problem occurs in the ETERNUS DX60/DX80/
DX90.
There are four methods to notify of an event: E-Mail, SNMP Trap, Host Sense, and REMCS.
When notifying of an event by E-mail, "Setup E-Mail Notification" must be set. When notifying of
an event by the SNMP Trap, "Setup SNMP Agent" must be set. When notifying of an event by
REMCS, "Setup Remote Support" must be set. Refer to "ETERNUS DX60/DX80/DX90 Web GUI
User Guide" for details of the settings.
Refer
"ETERNUS DX60/DX80/DX90 Web GUI User Guide"
"ETERNUS DX60/DX80/DX90 CLI User Guide"
"ETERNUS VSS Hardware Provider manual"
This section explains the procedure for the setup using GUI. For setting-
related details, refer to the "ETERNUS DX60/DX80/DX90 Web GUI User
Guide".
For the setup using the CLI commands, refer to "ETERNUS DX60/DX80/
DX90 CLI User Guide".
"ETERNUS DX60/DX80/DX90 Web GUI User Guide"
"ETERNUS DX60/DX80/DX90 CLI User Guide"
"ETERNUS DX60/DX80/DX90 Web GUI User Guide"
When selecting REMCS for event notification, only the REC related error
event settings can be changed.
For the ETERNUS DX60/DX80, note that the REMCS field is not displayed
in the [Setup Event Notification] screen of GUI.
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
170
P3AM-3042-08ENZ0