Power Cord Connection - Fujitsu Eternus DX60 User Manual

Disk storage system
Hide thumbs Also See for Eternus DX60:
Table of Contents

Advertisement

Chapter 6 Cable Connection

6.7 Power Cord Connection

6.7
Power Cord Connection
Connect the power cords to the ETERNUS DX60/DX80/DX90.
Do Not
WARNING
Do not disconnect the power cord plug with wet hands as it may
lead to fire or electrical shock.
Do not attempt to repair a damaged power cord. Do not pull on,
excessively bend/twist, apply heat or place heavy objects on the
cord. Doing so will damage the cord, which may lead to fire or
electrical shock.
Do not put the stress on the root of the power cord, for example, by
twisting it. Doing so may expose or cut the cable core of the power
cord, causing fire or electric shock
Do not use the power cord if it is damaged or the plug does not
snugly fit into the socket as it may cause fire or electrical shock.
Do not use a power cord other than one attached, or the one
specified. Do not use the attached power cord or specified power
cord for other devices. Doing so may cause failure, fire, or electric
shock.
Do
Wipe clean any excess dust from the plug prongs or socket with a
dry cloth. Failure to do so, may lead to fire or electrical shock.
Ground
CAUTION
Use a power cord with ground lead. Using a power cord without
ground lead may cause fire, electric shock, or malfunction.
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
124
P3AM-3042-08ENZ0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx90Eternus dx80

Table of Contents