Figure 7.17 [Setup Sas Host] Screen - Fujitsu Eternus DX60 User Manual

Chapter 7 Setup
7.2 Basic Setup
■ For SAS
5
5-1
On the [Setup SAS Host] screen, set the SAS address, and other items for the server
being connected to the ETERNUS DX60/DX80.
(1)
Click the [Add] button on the [Setup SAS Host] screen
(2)
Specify a SAS address, server name, and host response.

Figure 7.17 [Setup SAS Host] screen

(3)
Specify the other necessary items, and click the [Add] button.
The target SAS host is displayed in the "Registered SAS Host List" field.
(4)
When adding another SAS host, repeat
If another SAS host does not need to be added, click the [Done] button.
(5)
Click the [Next >] button.
A confirmation screen appears.
(6)
Click the [OK] button.
The settings are reflected and the [Configure Affinity Group] screen in
Set up an affinity group.
Create the group of volumes that are to be recognized by the server (affinity group).
Create an affinity group when using the Host Affinity function. When
IMPORTANT
not using the Host Affinity function, click the [Next] button and
proceed to [Define LUN Mapping].
Click the [Create] button.
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
Step (2) and
157
Step (3).
Step 5 appears.
P3AM-3042-08ENZ0