Chapter 4 Flow from Installation to Operation
Basic Setup
Start GUI from the Web browser of the connected PC, and perform the basic setup of the
ETERNUS DX60/DX80/DX90.
Initial Setup
(1)
Perform device initial setup.
•
Set Date and Time
•
Set Storage System Name
•
Change Password
•
Modify the FC Port Mode (only for ETERNUS DX90)
•
Port Parameter Settings
•
Setup Network Environment
Refer
"7.2.1 Initial Setup" (page 141)
Configuration Wizard
(2)
Perform the settings necessary for device operation.
•
Create RAID Group
•
Create Volume
•
Define Host
•
Configure Affinity Group
•
Define LUN Mapping
Refer
"7.2.2 Configuration Wizard" (page 150)
Assigning Hot Spares
(3)
To add hot spares, register them.
Refer
"7.2.3 Hot Spare Registration" (page 161)
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
84
P3AM-3042-08ENZ0