Fujitsu Eternus DX60 User Manual page 198

Chapter 8 Installing Optional Products
8.2 Drive Enclosure Installation
8
Attach the "DE_No." label to the following positions.
Attach the label starting at the top (miniSAS cable (for drive enclosures) connection order)
on the controller enclosure.
• 3.5" type drive enclosure
At the right side of the
front of the drive enclosure
DE_No. label
• 2.5" type drive enclosure
At the right side of the
front of the drive enclosure
DE_No. label
DE_No. label is attached to the base device.
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
Between the EXP#0 and EXP#1 expanders
at the rear of the drive enclosure
Between the EXP#0 and EXP#1 expanders
at the rear of the drive enclosure
198
P3AM-3042-08ENZ0