Chapter 8 Installing Optional Products
8.2 Drive Enclosure Installation
7
■ 3.5" type drive enclosure
■ 2.5" type drive enclosure
Fix the drive enclosure in the rack.
Use the two thumb screws at the front of the drive enclosure to fasten it in the rack.
Thumb screw
•
Use the thumb screw to fasten the front right of the drive enclosure to the rack.
•
Do not fix the front left of the drive enclosure to the rack at this point.
After all work for addition has finished, attach the supplied flange cover, and use the
thumb screw to fasten the front left of the drive enclosure to the rack.
Thumb screw
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
(Rear rack pillars)
(Rear rack pillars)
197
P3AM-3042-08ENZ0