Fujitsu Eternus DX60 User Manual page 192

Chapter 8 Installing Optional Products
8.1 Disk Installation
5-2
5-3
5-4
6
7
8
9
Insert the disk all the way into in the slot, making sure that it is firmly seated and
keeping the lock lever open.
Hold the disk with both hands to protect against jarring.
IMPORTANT
Swing the lock lever in the direction of the arrow, until the lock clicks shut.
Lock lever
Check that the newly installed disk's DISK READY LED lights up green after
approximately 30 seconds.
Repeat Step 4 and Step 5
Remove the wrist strap.
On the Storage System Status screen of GUI, check that the added disks have
been recognized.
Set up RAID groups, volumes, hot spares, and Host Affinity settings on the new
disks, as required.
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
for each additional disk.
192
End of procedure
P3AM-3042-08ENZ0