Fujitsu Eternus DX60 User Manual page 130

Chapter 6 Cable Connection
6.7 Power Cord Connection
3
4
5
Connect the power cords (AC input cables) (4m) supplied with the AC outlet box
to the inlet of the AC outlet box.
Inlet
INPUT #0
AC outlet box
1
2
3
4
5
Use the power cord clamps to prevent the power plugs from coming unplugged.
Attach the power clamps removed in
Connect the plug at the other end of each of the power cords (AC input cables)
(4m) connected in Step 3
Connecting the power cords (AC input cables) to different power
IMPORTANT
systems, on the INPUT#0 and INPUT#1 sides respectively, prevents
power supply facility failures.
WARNING
•
CAUTION
•
•
•
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
Inlet
INPUT #1
Step 1.
to the outlet.
Do Not
Do not connect power cords or other cables during
thunderstorms, as lightning can result in fire or electric shock.
Do
Be sure to fully insert each plug into its socket. Failure to do
so may lead to fire or electrical shock.
Do Not
When disconnecting the power plug, be sure to pull from the
plug and not the cord. Pulling the cord may expose or snap
the inner wires, which can lead to fire or electrical shock.
Do not use the server service outlet to connect the device
power cord.
130
P3AM-3042-08ENZ0