Chapter 3 Standard Operations
3.6 Wearing the Wrist Strap
3.6
Wearing the Wrist Strap
The wrist strap must be worn to discharge the human body's natural static electricity.
This section explains how to wear the wrist strap.
One end of the wrist strap (part A in the figures) connects to the metal frame of the ETERNUS
DX60/DX80/DX90, while the other end (part B in the figures) should be wrapped around your
wrist. Remove the protective film from part A, and attach it to the metal frame of the rack.
Wrap around your wrist
B
Figure 3.1
Do
CAUTION
When performing the following operations, make sure to wear the
supplied wrist strap, and do not remove it until the operation is
complete.
•
Installing a controller enclosure, drive enclosures, and AC outlet
boxes
•
Connecting cables
•
Installing disks
A
Wrist strap
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
Connect to the metal frame
of the rack
81
P3AM-3042-08ENZ0