Honeywell VFD CORE Installation Instructions Manual page 42

CHAPTER 7: OPTIONAL COMPONENTS
RIGHT and LEFT arrows to move the cursor with a numeric parameter, or to enter into and out of menus.
UP and DOWN arrows used to change numeric parameter values, or cycle through menu options.
Function Keys - will have different functions at different times as displayed on the screen. Used during
Wizard Mode.
F1 F2
F3
F4
Pressing the HAND key will take the VFD into Hand control, where the user can control the motor
Frequency and START and STOP.
HAND
Pressing this key will revert the VFD to remote/Automatic control from a remote speed and start
command source.
AUTO
LED
Steady ON: operation indicator for the VFD, including DC brake, zero speed, standby, restart after fault
and speed search.
Blinking: VFD is decelerating to stop.
RUN
Steady OFF: VFD is not running.
Steady ON: VFD is stopped.
Blinking: VFD is in the standby status.
STOP
RESET Steady OFF: VFD running.
Operation Direction LED (green: forward running, red: reverse running).
Blinking: drive is changing the operation direction.
FWD
REV
HAND LED: HAND LED is on (HAND mode); HAND LED is off (AUTO mode).
HAND
AUTO LED: AUTO LED is on (AUTO mode); AUTO LED is off (HAND mode).
AUTO
63-4528—04
Table 2. Descriptions of Keypad Functions
Table 3. Descriptions of LED Functions
42
Descriptions