Honeywell VFD CORE Installation Instructions Manual page 230

CHAPTER 12: DESCRIPTION OF PARAMETER SETTINGS
Wiring: Fixed Time Circulation (by time) Control can control up to 8 motors. The diagram below is an example of controlling 4
motors at the same time.
10 – 01 Number of Motors to be connected
Settings
• Number of Motors: Maximum 8 motors. After setting number of motor to be connected at the same time, multi-function output
terminals will follow automatically the setting as shown in the table below.
63-4528—04
VFD CORE
RY00
Fig. 3. Controlling 4 motors at the same time.
1 to 8
L N
CONTACTOR
CONTACTOR
CONTACTOR
CONTACTOR
230
M 1
M 2
M 3
M 4
M33767
Factory Setting: 1