Snmp User Table - D-Link DES-3526 - Switch - Stackable User Manual

xStack

SNMP User Table

The SNMP User Table displays all of the SNMP User's currently configured on the Switch.
To view this window click, Security Management > SNMP Manager > SNMP User Table.
To delete an existing SNMP User Table entry, click the
to delete.
To display the detailed entry for a given user, click on the hyperlinked User Name. This will open the SNMP User Table Display
window, as shown below.
The following parameters are displayed:
Parameter
User Name
Group Name
SNMP Version
Auth-Protocol
Priv-Protocol
To return to the SNMP User Table, click the
To add a new entry to the SNMP User Table Configuration window, click on the Add button on the SNMP User Table window.
This will open the SNMP User Table Configuration window, as shown below.
®
DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Figure 7- 44. SNMP User Table window
Figure 7- 45. SNMP User Table Display window
Description
An alphanumeric string of up to 32 characters. This is used to identify the SNMP users.
This name is used to specify the SNMP group created can request SNMP messages.
V1 - Indicates that SNMP version 1 is in use.
V2 - Indicates that SNMP version 2 is in use.
V3 - Indicates that SNMP version 3 is in use.
None - Indicates that no authorization protocol is in use.
MD5 - Indicates that the HMAC-MD5-96 authentication level will be used.
SHA - Indicates that the HMAC-SHA authentication protocol will be used.
None - Indicates that no authorization protocol is in use.
DES - Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-56)
standard.
Show All SNMP User Table Entries
button under the Delete heading corresponding to the entry you wish
link.
188