Port Bandwidth - D-Link DES-3526 - Switch - Stackable User Manual

xStack

Port Bandwidth

The bandwidth control settings are used to place a ceiling on the transmitting and receiving data rates for any selected port. Click
Configuration > QoS > Port Bandwidth, to view the window shown below.
The following parameters can be set or are displayed:
Parameter Description
A consecutive group of ports may be configured starting with the selected port.
From/To
Type This drop-down menu allows you to select between RX (receive), TX (transmit), and Both. This
setting will determine whether the bandwidth ceiling is applied to receiving, transmitting, or both
®
DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Figure 6- 52. Bandwidth Settings window
84