Mac Notification; Mac Notification Global Settings - D-Link DES-3526 - Switch - Stackable User Manual

xStack
After setting the previous parameters, click Apply to allow your changes to be implemented. The LACP Port Table shows which
ports are active and/or passive.

MAC Notification

MAC Notification is used to monitor MAC addresses learned and entered into the forwarding database.

MAC Notification Global Settings

To globally set MAC notification on the Switch, open the following window by opening Configuration > MAC Notification >
MAC Notification Global Settings:
The following parameters may be modified:
Parameter Description
State Enable or disable MAC notification globally on the Switch
Interval (sec) The time in seconds between notifications.
History size The maximum number of entries listed in the history log used for notification. Up to 500 entries
can be specified.
®
DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
dynamically, one end of the connection must have "active" LACP ports (see above).
Figure 6- 12. MAC Notification Global Settings window
40