D-Link DES-3526 - Switch - Stackable User Manual page 204

xStack
The following parameters can set:
Parameter Description
User Name Enter an alphanumeric string of up to 32 characters. This is used to identify the SNMP user.
Group Name This name is used to specify the SNMP group created can request SNMP messages.
SNMP Version V1 - Specifies that SNMP version 1 will be used.
V2 - Specifies that SNMP version 2 will be used.
V3 - Specifies that SNMP version 3 will be used.
MD5 - Specifies that the HMAC-MD5-96 authentication level will be used. This field is only
Auth-Protocol
operable when V3 is selected in the SNMP Version field and the Encryption field has been
checked. This field will require the user to enter a password.
SHA - Specifies that the HMAC-SHA authentication protocol will be used. This field is only
operable when V3 is selected in the SNMP Version field and the Encryption field has been
checked. This field will require the user to enter a password.
Priv-Protocol None - Specifies that no authorization protocol is in use.
DES - Specifies that DES 56-bit encryption is in use, based on the CBC-DES (DES-56) standard.
This field is only operable when V3 is selected in the SNMP Version field and the Encryption field
has been checked. This field will require the user to enter a password between 8 and 16
alphanumeric characters.
Encrypted Checking the corresponding box will enable encryption for SNMP V3 and is only operable in
SNMP V3 mode.
To implement changes made, click Apply. To return to the SNMP User Table, click the
®
DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Figure 7- 46. SNMP User Table Configuration window
Show All SNMP User Table Entries
189
link.