D-Link DES-3526 - Switch - Stackable User Manual page 192

xStack
To delete an Enable Method List defined by the user, click the X under the Delete heading corresponding to the entry desired to be
deleted. To modify an Enable Method List, click on its hyperlinked Method List Name. To configure a Method List, click the Add
button.
Both actions will result in the same window to configure:
To define an Enable Login Method List, set the following parameters and click Apply:
Parameter Description
Method List Name Enter a method list name defined by the user of up to 15 characters.
Method 1, 2, 3, 4 The user may add one, or a combination of up to four of the following authentication methods to
this method list:
®
DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Figure 7- 33. Enable Method List Settings window
Figure 7- 34. Enable Method List - Edit window
Figure 7- 35. Enable Method List - Add window
local_enable - Adding this parameter will require the user to be authenticated using
•
the local enable password database on the Switch. The user in the next section
entitled Local Enable Password must set the local enable password.
none - Adding this parameter will require an authentication to access the Switch.
•
177