Dhcp Local Relay Settings - D-Link DES-3526 - Switch - Stackable User Manual

xStack

DHCP Local Relay Settings

The DHCP Local Relay Settings are used to request packets from the Client to the Server. As a result of the customer's
networking environment, DCHP Local Relay is implemented so that it is independent from the original behavior of DHCP relay.
The DHCP Local Relay is also independent from the option82 module in the forwarding way and the content of DHCP request
packets from Client to Server.
To enable and configure DHCP Local Relay Global Settings on the Switch, click Configuration > Layer 3 IP Networking >
DHCP/BOOTP Relay > DHCP Local Relay Settings:
The following parameters may be configured or viewed.
Parameter
DHCP/BOOTP Local
Relay Operation State
VLAN Name
VID List
State
Click Apply to implement changes made.
®
DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Figure 6- 125. DHCP Local Relay Settings window
Description
Used to Enable or Disable the DHCP/BOOTP Local Relay Operation State.
This is the VLAN Name that identifies the VLAN the user wishes to modify the
DHCP/BOOTP Local Relay Settings for.
This is the VID List that identifies the VLAN the user wishes to modify the DHCP/BOOTP
Local Relay Settings for.
Enable or Disable the DHCP/BOOTP Local Relay Settings state.
141