Configuring For External Timing Example - Paradyne ACCULINK 316x Operator's Manual

Configuring for External Timing Example

To configure network timing,
1. Press F3 to select Cnfig from the top-level menu
screen.
DSU ESF
Stat
F1
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.
Load from:
Activ
F1
3. Press F1 to select Edit.
Choose Funct:
Edit
F1
4. From the Edit screen, press the
bring the Gen selection onto the screen.
Edit:
DTE
F1
5. Press F3 to select Gen for the general
configuration options.
Edit:
NET
F1
3160-A2-GB22-10
Test Cnfig
F2 F3
Cust Fact1
F2 F3
Save
F2 F3
key twice to
Port NET
F3
F2
Chan Gen
F2 F3
December 1996
6. The Generate Yellow Alarm configuration option
displays first. Press F1 (next) once to display the
DSU/CSU Clock Source configuration option.
GenYellow:Enab
Next
F1
7. Select the master clock source. For external, press
the key three times to scroll the Ext selection
onto the screen.
Clock Src:NET
Next
F1
8. Press F3 to select external timing.
Clock Src:NET
Prt1
F1
9. Select the appropriate external clock rate by
pressing the corresponding Function key. This step
is mandatory if you have chosen external clocking.
Clock Rate:1544
Next
F1
Differences Using the Async Terminal: To configure
network timing, select General from the main/
configuration/edit menu.
Operation
Enab Disab
F2 F3
NET DTE
F2 F3
Int Ext
F3
F2
2048 1544
F3
F2
3-51