Paradyne ACCULINK 316x Operator's Manual page 7

The load number is labeled on the equipment. The load number (LN) assigned to each terminal
device denotes the percentage of the total load to be connected to a telephone loop which is used
by the device to prevent overloading. The termination on a loop may consist of any combination of
devices subject only to the requirement that the total of the Load Numbers of all devices does not
exceed 100.
If your equipment is in need of repair, refer to the procedure in the Government Requirements and
Equipment Return section.
3160-A2-GB22-10
Users should not attempt to make such connections
themselves, but should contact the appropriate electric
inspection authority, or electrician, as appropriate.
December 1996
CAUTION
Government Requirements
F