Configuring For External Timing - Paradyne 3160-A4 Operator's Manual

Configuring for External Timing

Procedure
To configure 2-port and 4-port DSU/CSUs for external timing:
3160-A2-GB24-10
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
screen.
5. Select Gen.
Edit:
NET Chan
F1 F2
6. Press F1 (Next) to display the next configuration option (Clock Src).
7. Select the master clock source. For external, press the
selection appears on the screen.
8. Select Ext (external timing).
Clock Src:Ext
Prt1 Int
F2
F1
9. Select the appropriate external clock rate by pressing the corresponding
Function key. This step is mandatory if you have chosen external clocking.
Clock Rate:1544
Next 2048
F1 F2
March 2001
key until the Gen selection appears on the
Gen
F3
Ext
F3
1544
F3
4. Configuration
key until the Ext
4-43