Disconnect Screen; Entering Numbers In The Phone Directories - Paradyne ACCULINK 316x Operator's Manual

Differences Using the Async Terminal: To disconnect
an established modem connection, select Disconnect from
the main/control/call_setup screen. Figure 3-41 shows an
example of the screen that appears. The Async Terminal
feature does not support the pass-through disconnect
feature.
Customer ID: New Cust
Directory Number: _____
Directory Phone Number:
Disconnect
Main
Figure 3-41. Disconnect Screen

Entering Numbers in the Phone Directories

The 3160/3164 DSU/CSUs have five general
directories (1 through 5) and one alarm directory (A)
available. Use the general directories to store phone
numbers for remote devices such as 3160/3164
DSU/CSUs and ASCII printers. Use the alarm directory to
store the phone number of the primary ASCII terminal or
printer you use to display or print alarms. This function is
not available for 3161 DSU/CSUs.
To enter or change numbers in the phone directories,
1. Press the key from the top-level menu screen
to bring the Ctrl branch onto the front panel LCD.
DSU ESF
Stat
F1
3160-A2-GB22-10
main/control/call_setup
Model: ACCULINK XXXX
Call Setup
Previous Cntrl–x to Disconnect
Test Cnfig
F3
F2
2. Press F3 to select Ctrl from the top-level menu
screen.
3. From the Control screen, press F1 to select Call.
4. From the Call Setup screen, press F3 to select
ChDir.
The Directory 1 displays first, along with its
phone number if one has been entered.
5. Press F1 (Next) to display the next directory (2, in
this case). Press F2 (Previous) to display the
previous directory (A, in this case). Directories
appear in order, 1–5 and then A.
December 1996
DSU ESF
Test Cnfig Ctrl
F1 F2 F3
Control:
Call Rel LED
F3
F1 F2
Call Setup:
Pass Dial ChDir
F3
F1 F2
1: xxxxxxxxxxxxxxxxx
Next Prev Edit
F3
F1 F2
Operation
3-67