Aborting A Lamp Test - Paradyne ACCULINK 316x Operator's Manual

2. From the Test screen, press
the Lamp selection on the screen.
Test:
Rlpbk Lpbk
F1
3. From the Test screen, press F3 to select Lamp.
Test:
Lpbk
F1
4. From the Lamp Test screen, press F2 to select
Start.
Lamp Test:
Abort
F1
5. The following screens alternately appear on the
LCD until you press a Function key to return to
the Lamp Test screen. In addition, all LEDs blink.
F1
0123456789 : ; < = > ?
@ABCDEFGHIJKLMNO
F1
3160-A2-GB22-10
once to display
Ptrns
F2 F3
Ptrns Lamp
F2 F3
Start
F2 F3
F3
F2
F3
F2
December 1996
6. When you are satisfied that all LEDs are lighting
and the LCD is functioning properly, you can
abort the Lamp test from the Lamp Test screen.
The Device Health and Status screen appears
automatically if there is no activity on the
DSU/CSU front panel for five minutes. However,
the Lamp test remains active until it is aborted.

Aborting a Lamp Test

To abort the Lamp test,
1. Display the Lamp Test screen. To do this when the
LCD is alternating the Lamp test screens, press
any function key. Otherwise, follow Steps 1
through 3 for starting a Lamp test.
Lamp Test:
Abort
F1
2. From the Lamp Test screen, press F1 to select
Abort.
Lamp Test:
Abort
F1
Maintenance
Start
F2 F3
Start
F2 F3
4-15