Display Channels Screen - Paradyne ACCULINK 316x Operator's Manual

7. From the Display Chan screen, press F1 (NET) to
display the channels allocated to the Network T1
interface.
Display Chan:
NET
F1
NOTE
If the DSX-1 Drop/Insert T1
Network interface is disabled, the
Network T1 interface channels
are displayed immediately. The
Display Chan screen does not
appear.
Or, press F2 (DTE) to display the channels
allocated to the DSX-1 Drop/Insert T1 interface.
Display Chan:
NET
F1
8. If you pressed F1 (NET) the channels allocated to
the Network T1 interface are displayed. Line 1
displays the 24 channels for the Network T1
interface, while Line 2 displays what is allocated
to the DS0 channel shown in Line 1. Pressing the
or key scrolls the channels onto the screen
in groups of three.
N1
D2
F1
3160-A2-GB22-10
DTE
F2 F3
DTE
F2 F3
N2 N3
D3 Prt1
F3
F2
December 1996
If you pressed F2 (DTE), the channels allocated to
the DSX-1 Drop/Insert T1 interface are displayed.
Line 1 displays the 24 channels for the DSX-1
Drop/Insert T1 interface, while Line 2 displays
what is allocated to the DS0 channel shown in
Line 1.
D1
–
F1
Differences Using the Async Terminal: To display DS0
channel assignments, select Display Channels from the
main/configuration/edit/channel menu. Figure 3-29 shows
an example of the screen that appears. The screen displays
both the Network T1 and the DSX-1 Drop/Insert interface
channel assignments.
Model: ACCULINK XXXX
Customer ID: New Cust
N1: Prt1 N7: D7
N2: Prt1 N8: D8
N3: Prt1 N9: D9
N4: D4 N10: D10
N5: D5 N11: D11
N6: D6 N12: D12
D1: N17 D7: N7
D2: Prt2 D8: N8
D3: Prt2
D9: N9
D4: N4 D10: N10
D5: N5 D11: N11
D6: N6 D12: N12
Main
Figure 3-29. Display Channels Screen
Operation
D2 D3
N1 N2
F3
F2
main/configuration/edit/channel/display
NET
N13: D13 N19: D19
N14: D14 N20: D20
N15: D15 N21: D21
N16: D16 N22: Prt3
N17: – N23: Prt3
N18: D18 N24: Prt3
DTE
D13: N13 D19: N19
D14: N14 D20: N20
D15: N15 D21: N21
D16: N16 D22: Prt4
D17: – D23: Prt4
D18: N18 D24: Prt4
Previous Cntrl–x to Disconnect
3-41