Paradyne ACCULINK 316x Operator's Manual page 206

Data service unit/channel service unit (includes terminal user interface)
Table of Contents

Advertisement

AIS
AMI
Async Terminal
Auxiliary Backplane
AWG
BES
BPV
B8ZS
CRC
CSU
DCE
DSU
DS0
DS1
DSX-1
DTE
DTMF
D4
3160-A2-GB22-10
Glossary
Alarm Indication Signal. A signal transmitted instead of the normal signal to
continue transmission continuity and to indicate to the receiving terminal that a
transmission fault exists at either the transmitting terminal or upstream of the
transmitting signal. Sometimes referred to as Blue Alarm.
Alternate Mark Inversion. A line encoding technique and a bipolar return-to-zero
signal.
This feature allows a DSU/CSU to be controlled from an asynchronous (async)
terminal. When this feature is enabled, the async terminal menus and displays
emulate the DCP without being limited to the 2-line LCD display.
An 8-slot backplane that fits over one half of the open section of the 3000 Series
Carrier. This is a passive assembly that provides interconnect capability between
3151 CSUs and 3161 DSU/CSUs and provides all interface connectors.
American Wire Gauge.
Bursty Error Seconds. A second in which more than one, but less than 320 CRC6
error events, have occurred.
Bipolar Violation. A modified bipolar signaling method in which a control code is
inserted into the original data format.
Bipolar with 8 Zero Substitution.
Cyclic Redundancy Check. A method of error detection.
Channel Service Unit. Protects the T1 line from damage and regenerates the
T1 signal.
Data Communications Equipment.
Data Service Unit. Data communications equipment which transmits digital data
over a private line. Also used for limited distance communications over the PSTN
when a high-speed modem is not needed.
Digital Signal level 0. A signal of worldwide standard speed for PCM digital voice
channels running at 64 kbps.
Digital Signal level 1. A signal of 1.544 Mbps in North America.
Digital Signal Cross Connect level 1. An interconnection point for terminals,
multiplexers and transmission facilities.
Data Terminal Equipment.
Dual Tone Multifrequency. The basis of operation for a pushbutton telephone.
The transmission standard that specifies 12 frames as a superframe that is used for
frame synchronization and to locate signaling bits.
December 1996
Glossary-1

Advertisement

Table of Contents
loading

Table of Contents