Led Display Selection Screen; Front Panel Emulation Screen Models 3160/3164 Dsu/Csus; Front Panel Emulation Screen Model 3161 Dsu/Csu; Front Panel Emulation On A Pc - Paradyne ACCULINK 316x Operator's Manual

Figure 3-8 shows an example of this selection screen.
You can set the front panel LED display to be DTE or a
port.
Customer ID: New Cust
Miscellaneous Control Options
Front Panel LED Display: _____
Customer Identification Name/Number: _____
Change Password?: _____
Save Main
Figure 3-8. LED Display Selection Screen

Front Panel Emulation on a PC

The 316x DSU/CSU front panel can be mimicked on
an attached PC. This front panel emulation capability
allows you to access the 3160/3164 DSU/CSU (local or
remote) through a PC connected to the COM or MODEM
port. For 3161 DSU/CSUs, only one slot in the carrier can
be configured as the COM port to provide access for a PC.
This slot provides access to all of the circuit cards in the
carrier.
Use the front panel display (Figure 3-9) to control the
DSU/CSU from a PC just as though you are operating
from the DSU/CSU's own front panel. The PC window is
updated every five seconds to show the current state of the
DSU/CSU.
3160-A2-GB22-10
main/control/miscellaneous
Model: ACCULINK XXXX
Previous Cntrl–x to Disconnect
December 1996
The 3161 front panel emulation screen (Figure 3-10)
looks the same as the 3160/3164 DSU/CSU screen, except
for the additional function icons defined in Table 3-5.
Figure 3-9. Front Panel Emulation Screen
Models 3160/3164 DSU/CSUs
Figure 3-10. Front Panel Emulation Screen
Model 3161 DSU/CSU
Operation
3-13