Display Channel Symbols; Displaying Ds0 Channel Assignments - Paradyne ACCULINK 316x Operator's Manual

ACCULINK 316x DSU/CSU

Displaying DS0 Channel Assignments

Use the Display command for channel configuration to
view how the DS0 channels for either the DSX-1
Drop/Insert T1 interface or the Network interface are
currently allocated. The display appears on the front panel
LCD.
Line 1 of the display shows the 24 channels of the
selected interface. Pressing
three channels onto the LCD. Line 2 displays what is
allocated to the DS0 channel listed in Line 1. Symbols
used in the display are shown in Table 3-8.
Table 3-8

Display Channel Symbols

Symbol
–
Prt n
N n
D n
To display the DS0 channel allocation,
1. Press F3 to select Cnfig from the top-level menu
screen.
Stat
F1
3-40
or scrolls the next
Meaning
DS0 channel is not
allocated
DS0 channel is allocated to
Port n , where n is 1, 2, 3,
or 4.
DS0 channel is allocated to
Network T1 interface DS0
channel n where n can be
any number from 1 through
24.
DS0 channel is allocated to
DSX-1 Drop/Insert T1
interface DS0 channel n
where n can be any
number from 1 through 24.
DSU ESF
Test Cnfig
F2 F3
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.
3. Press F1 to select Edit.
4. Press the
the Chan selection.
5. Press F3 to select Chan.
6. From the Channel Config screen, press F1 to
select Dsply (display).
December 1996
Load from:
Activ Cust Fact1
F1 F2 F3
Choose Funct:
Edit Save
F1 F2 F3
key from the Edit screen to display
Edit:
DTE Port NET
F3
F1 F2
Edit:
Port NET Chan
F1 F2 F3
Channel Config:
Dsply Clear DTE
F1 F2 F3
3160-A2-GB22-10