3160/3164 Dsu/Csu Cabling - Paradyne ACCULINK 316x Operator's Manual

ACCULINK 316x DSU/CSU

3160/3164 DSU/CSU Cabling

The 3160/3164 DSU/CSU is supplied with an ac power
transformer and a VF cable for the integral modem. You
must provide the DTE cable to connect the DTE to the
DSU/CSU.
Optional cables you can order from the company are
the following:
T1 line interface cable.
Data port cables (DB25 to V.35 and DB25 to
RS449).
COM port cable to locally connect an ASCII
terminal/printer or async terminal.
2-14
COM port cable to locally connect a PC.
A dc voltage power cable for the –48 Vdc
redundant source, –48 Vdc single source, and
+24 Vdc power source.
Figure 2-13 illustrates possible cabling configurations.
In Canada, an RJ48C-to-CA81A Adapter Cable (Feature
Number 3100-F1-510) must be used to connect the
T1 network. See Appendix D, Pin Assignments, for more
cable information. See Appendix H, Equipment List, for
part number information. See the COMSPHERE
3000 Series Carrier Installation Manual for Model 3161
DSU/CSU cabling information.
December 1996 3160-A2-GB22-10