Save Edit Screen; Selecting/Copying To A Specific Port; Selecting A Specific Port - Paradyne ACCULINK 316x Operator's Manual

To protect you from accidentally exiting an edit session
before saving your changes, the system prompts Save
Options? if you select either Main or Cntrl-x from an
edit screen (see Figure 3-18). If you respond No, the
system exits without saving the changes. If you respond
Yes, you are prompted to specify where the changes
should be saved.
Customer ID: New Cust
Miscellaneous Control Options
Customer Identification Name/Number: _____
Re–enter Password: _____
Save
Figure 3-18. Save Edit screen
NOTE
If you terminate async terminal
control by changing the
configuration interface options,
the async terminal must be
reconfigured on the port.

Selecting/Copying to a Specific Port

You have the capability of selecting a specific port to
configure and to copy the configuration options for one
port to another port or to all ports. You can use the
configuration worksheets provided to note the
configuration options you have chosen (see Figure 3-19).
3160-A2-GB22-10
main/control/miscellaneous
Model: ACCULINK XXXX
Yes
Change Password: _____
Password: _____
Main Previous Cntrl–x to Disconnect

Selecting a Specific Port

To select a specific port to configure,
1. Press F3 to select Cnfig from the top-level menu
screen.
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.
3. Press F1 to select Edit.
4. Press F2 to select Port.
5. From the Port Select screen, press the Function
key that corresponds to the desired port. Use the
key to scroll addition ports onto the screen, if
necessary.
December 1996
DSU ESF
Stat Test Cnfig
F1 F2 F3
Load from:
Activ Cust Fact1
F1 F2 F3
Choose Funct:
Edit Save
F1 F2 F3
Edit:
DTE Port NET
F3
F1 F2
Port Select:
Copy Prt1 Prt2
F3
F1 F2
Operation
3-21