Configuring For Network Timing; Configuring For External Timing - Paradyne 3160 Operator's Manual

Configuring for Network Timing

"

Configuring for External Timing

"
3160-A2-GB21-80
Procedure
To configure for network timing:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
the screen.
5. Select Gen.
Edit:
NET Chan
F1
6. Press F1 (Next) to display the next configuration option (Clock Src).
7. Select the master clock source. For network, press F2 (note that network is
also the default).
Clock Src:NET
Next NET
F1
Procedure
To configure 2-port and 4-port DSU/CSUs for external timing:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
the screen.
March 1999
key until the Gen selection appears on
Gen
F2 F3
DTE
F3
F2
key until the Gen selection appears on
Operation
3-47