Paradyne ACCULINK 316x Operator's Manual page 67

To select the MODEM port as the link to the SNMP
manager from the front panel,
1. Press F3 to select Cnfig from the top-level menu
screen.
DSU ESF
Stat
F1
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.
Load from:
Activ
F1
3. Press F1 to select Edit.
Choose Funct:
Edit
F1
4. Press the key from the Edit screen to display
the User selection.
Edit:
DTE
F1
5. Press F3 to select User.
Edit:
Chan
F1
3160-A2-GB22-10
Test Cnfig
F2 F3
Cust Fact1
F2 F3
Save
F3
F2
Port NET
F3
F2
Gen User
F2 F3
December 1996
6. Press the F1 (Next) key until the Modem Use
configuration option appears.
Self-Test:Enab
Next
F1
7. Press F2 to configure the MODEM port as the
management link to an external SNMP manager.
Modem Use:
Next
F1
To select the COM port as the link to the SNMP
manager,
1. Press F3 to select Cnfig from the top-level menu
screen.
DSU ESF
Stat
F1
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.
Load from:
Activ
F1
Operation
Enab Disab
F2 F3
SNMP ASCII
F2 F3
Test Cnfig
F3
F2
Cust Fact1
F3
F2
3-25