Led Status Screen; Selecting The Dsx-1 Or A Port For Led Display - Paradyne ACCULINK 316x Operator's Manual

ACCULINK 316x DSU/CSU
Customer ID: New Cust
NET T1 DTE T1 Port1
Test
Sig Sig DTR
OOF OOF TXD
Alrm RXD
Alrm
PDV CTS
EER
BPV RTS
Refresh Main Previous Cntrl–x to Disconnect
Figure 3-7. LED Status Screen
The LEDs are sampled every 5 seconds from selection
time. Use Refresh to update the screen.

Selecting the DSX-1 or a Port for LED Display

Use the LED command on the Control branch to select
which port's (DSX-1 Drop/Insert or data port) status
appears on the five shared LEDs on the front panel.
To select a port for LED display,
1. From the top level menu screen, press
scroll the Ctrl name onto the screen.
DSU ESF
Stat
F1
3-12
main/status/leds
Model: ACCULINK XXXX
LEDs
Port2 Port3 Port4
DTR DTR DTR
TXD TXD TXD
RXD RXD RXD
CTS CTS CTS
RTS RTS RTS
once to
Test Cnfig
F3
F2
2. Press F3 to select Ctrl.
3. From the Ctrl screen, press F3 to select LED.
The currently selected port name appears on the
top line of the LCD.
4. From the LED Dsply screen, press the function
key that corresponds to the DSX-1 or port for
which you want the LEDs to display. Use the
scroll keys, if necessary.
Select DTE to monitor the DSX-1's SIG, OOF,
ALRM, PDV, and BPV status signals on the
shared LEDs.
Select a particular port to monitor the port's DTR,
TXD, RXD, CTS, and RTS control signals on the
shared LEDs.
Differences Using the Async Terminal: Select Front
Panel LED Display in the main/control/miscellaneous
screen to select a port for LED display.
December 1996
DSU ESF
Test Cnfig Ctrl
F1 F2 F3
Control:
Call Rel LED
F3
F1 F2
LED Dsply: DTE
DTE Prt1 Prt2
F1 F2 F3
3160-A2-GB22-10