Enabling/Disabling The Front Panel - Paradyne ACCULINK 316x Operator's Manual

Enabling/Disabling the Front
Panel
You can enable or disable the display of data through
the front panel. This feature is useful for ensuring that
other users do not inadvertently change the device's
configuration options while you are using the PC or async
terminal interface. The factory default is enable.
NOTE
If you disable the front panel, be
sure not to alter the options for
using the PC or Async terminal
interface. If this happens, you lose
the ability to communicate with
the device. You will need to
contact your service
representative.
To enable or disable the front panel:
1. Press F3 to select Cnfig from the top-level menu
screen.
DSU ESF
Stat
F1
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.
Load from:
Activ
F1
3160-A2-GB22-10
Test Cnfig
F2 F3
Cust Fact1
F3
F2
December 1996
3. Press F1 to select Edit.
Choose Funct:
Edit Save
F1
4. Press the key from the Edit screen to display
the User selection.
Edit:
DTE Port
F1
5. Press F3 to select User.
Edit:
Chan Gen
F1
6. Press the F1 (Next) key until the front panel
access configuration option appears.
Self-Test:Enab
Next Enab
F1
7. Press F2 to enable the front panel or F3 to disable
the front panel.
FP Access:
Next Enab
F1
Installation
F2 F3
NET
F3
F2
User
F2 F3
Disab
F2 F3
Disab
F3
F2
2-17