Paradyne ACCULINK 316x Operator's Manual page 69

To assign an IP address to the MODEM port,
1. Press F3 to select Cnfig from the top-level menu
screen.
DSU ESF
Stat
F1
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.
Load from:
Activ
F1
3. Press F1 to select Edit.
Choose Funct:
Edit
F1
4. Press the key from the Edit screen to display
the SNMP selection.
Edit:
DTE
F1
5. Press F3 to select SNMP.
Edit:
User
F1
3160-A2-GB22-10
Test Cnfig
F2 F3
Cust Fact1
F2 F3
Save
F3
F2
Port NET
F2 F3
Alarm SNMP
F2 F3
December 1996
6. Press F1 to select Gen from the SNMP Config
screen.
SNMP Config:
Gen Trap
F1
7. Press the F1 (Next) key until the Modem IP Adr
configuration option appears.
System Name:
Next Edit
F1
NOTE
Steps 8 and 9 describe the
process for entering an IP
address. This process applies to
any IP address.
8. Press F2 (Edit) to edit the IP address. You have the
option of using F3 (Clear) to reset the IP address
to the factory default 000.000.000.000.
Modem IP Adr:
Next Edit
F1
Operation
F2 F3
Clear
F2 F3
Clear
F2 F3
3-27