Valid Phone Number Characters - Paradyne ACCULINK 316x Operator's Manual

ACCULINK 316x DSU/CSU
6. Press F3 (Edit) to change the displayed directory's
phone number (phone numbers can be up to 40
characters). If you select Edit, the Edit screen
appears.
1: xxxxxxxxxxxxxxxxx
Next
F1
7. Use the and
under the digit(s) you want to change. Press F1 to
scroll up to a higher digit. Press F2 to scroll down
to a lower digit. The (
(default character) while the (
End Of Number (EON) character which
terminates the dial string and erases any characters
to the right when you use the Save function.
See Table 3-12 for the set of valid characters and
rules that apply to entering phone numbers.
Example: P9W8135551212
Valid
Characters
0 to 9 DTMF or pulse digits
* # DTMF digits
P Sets modem for Pulse Dial Mode
T Selects Tone (DTMF) dialing
W Wait for dial tone
B Blind dialing (you need not wait for a dial tone before
entering the dialing sequence)
, Creates a 2-second pause in the dialing sequence
<space> ( ) - Extra characters for readability. The space is the
default character.
<- End Of Number (EON) character, terminates the dial
string and erases all characters to the right after F3
(Save) is pressed
3-68
Prev Edit
F2 F3
keys to position the cursor
) key inserts blanks
) key invokes the
Table 3-12

Valid Phone Number Characters

Meaning
December 1996
8. Press F3 (Save) to store your changes in
nonvolatile memory. If you press
saving the phone number you just changed, the
previous phone number remains in effect.
1: xxxxxxxxxxxxxxxxx
Up
F1
Differences Using the Async Terminal: To edit phone
directories, select Edit Directory from the main/control
menu. This selection is the same as using the ChDir
selection from the front panel.
Restrictions
Pulse or Tone must be specified, otherwise
Tone is the default. This must be the first
character in the string, unless the first character
is B. Then, it must immediately follow the B.
Tone or Pulse must be specified, otherwise
Tone is the default. This must be the first
character in the string, unless the first character
is B. Then, it must immediately follow the B.
Must be the first character in the string to be
valid
or before
Down Save
F2 F3
—
—
—
—
—
—
3160-A2-GB22-10