Displaying Ds0 Channel Assignments - Paradyne 3172 Operator's Manual

Displaying DS0 Channel Assignments

Use the Display command (in the Channel
Configuration branch) to view how the DS0 channels are
currently allocated.
Line 1 of the display shows the 31 channels of the
selected interface. Pressing
three channels onto the LCD. Line 2 displays what is
allocated to the DS0 channel listed in Line 1. Symbols
used in the display are shown in Table 3-5.
Table 3-5
Display Channel Symbols
Symbol
– The DS0 channel is not allocated.
Prt n The DS0 channel is allocated to Port n ,
where n is 1, 2, 3, or 4.
N n The DS0 channel is allocated to the
Network E1 interface DS0 channel n ,
where n can be any number from 1
through 31.
D n The DS0 channel is allocated to the DTE
Drop/Insert interface DS0 channel n ,
where n can be any number from 1
through 31.
To display the DS0 channel allocation,
1. Press F3 to select Cnfig from the top-level menu
screen.
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
Function key. Use the scroll keys, if necessary.
3. Press F1 to select Edit.
4. Press the key from the Edit screen to display
the Chan selection.
3170-A2-GB20-10
or scrolls the next
Meaning
March 1996
5. Select Chan.
Edit:
Port NET
F1 F2
6. From the Channel Config screen, select Dsply
(display).
Channel Config:
Dsply Clear
F1 F2
7. From the Display Chan screen, select NET to
display the channels allocated to the Network E1
interface.
Display Chan:
NET DTE
F1 F2
Or, select DTE to display the channels allocated to
the DTE Drop/Insert interface.
NOTE
DTE does not appear when the
DTE Drop/Insert interface is
disabled.
Display Chan:
NET DTE
F1 F2
Operation
Chan
F3
DTE
F3
Ports
F3
Ports
F3
3-27