About The Log File - Hitachi XP P9500 User Manual

¢
#5
If you want to enable intermittent error monitoring, specify this key after
specifying the auto_failback and auto_failback_interval keys.
The following shows an example of an installation-information settings file.
[INSTALLATION_SETTINGS]
installfile_location=
workdir=
licensekeyfile=C:\temp\hdlm_license
installdir=D:\Program Files\HITACHI\DynamicLinkManager
storage_emc=n
storage_eva=n
HDLM_core=n
restart=n
[ENVIRONMENT_SETTINGS]
load_balance=on
load_balance_type=exlio
error_log_level=3
error_log_size=9900
error_log_number=2
trace_level=0
trace_file_size=1000
trace_file_number=4
path_health_check=on
path_health_check_interval=30
auto_failback=on
auto_failback_interval=1
intermittent_error_monitor=off
#intermittent_error_monitor_interval=30
#intermittent_error_monitor_number=3
remove_lu=off
remove_lu_force=off
Note:
¢
¢

About the Log File

During an unattended installation, information about the installation progress
is output to the log file named installhdlm.log.
The following explains the installhdlm.log file:
When on is specified for the auto_failback key in the installation-
information settings file
For an upgrade installation or re-installation:
When on is specified for the auto_failback key in the installation-
information settings file, or when automatic failbacks are enabled in
the installation pre-settings.
If a hash mark (#) is placed at the beginning of a line in the
installation-information settings file, that line is assumed to be a
comment.
If you do not want to specify a key or setting value, enter a hash
mark (#) at the beginning of that particular line.
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))
7-25