Performing A New Installation Of Hdlm On Windows Server 2008; In A Non-Cluster Environment - Hitachi XP P9500 User Manual
Hitachi dynamic link manager software user guide for windows (6.6) (hit5201-96006, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (574 pages) ,
- User manual (188 pages)
Table of Contents
Advertisement
HDLM Alert Driver Ver
Alive
HDLM Driver Ver
Alive
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
Even if you are using Oracle RAC, off appears for Support Cluster.
Even if this is the case, the cluster support function will run normally.
Performing a New Installation of HDLM on Windows Server 2008
Note:
If you are running a Windows Server 2008 Server Core environment,
install HDLM by performing an unattended installation.
In a Non-Cluster Environment
Before installing HDLM, have a license key ready.
If you want to perform an unattended installation, also be sure to prepare an
installation-information settings file.
To install HDLM in a non-cluster environment:
1
Log on to Windows as a member of the Administrators group.
.
2
Save the license key file directly under the Windows installation-
.
destination drive. Also, instead of using the license key file, you can
directly specify a license key during the installation of HDLM.
installation-drive:\hdlm_license
The license key file will be deleted after the installation finishes.
3
Perform the installation.
.
¢
¢
x.x.x-xx
x.x.x-xx
-
If you are not performing an unattended installation, insert the DVD
into the drive.
In the displayed window, click the Install button next to for
Windows of Hitachi Dynamic Link Manager Software.
If no window is displayed, manually run the installer (setup.exe).
The program checks whether HDLM has already been installed. If the
KAPL09173-W message appears, perform the procedure shown in
Upgrade Installation or Re-installation of HDLM on page
message does not appear, go to the next step.
If you are performing an unattended installation, execute the
installhdlm utility.
From the command prompt, execute the following command:
drive-containing-the-inserted-installation-DVD:\HDLM_Windows
\DLMTools\installhdlm -f installation-information-settings-
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
WakeupTime
yyyy/mm/dd hh:mm:ss 128
WakeupTime
yyyy/mm/dd hh:mm:ss
ElogMem Size
3-63. If a
3-51
Advertisement
Table of Contents
