Viewing Lu Information - Hitachi XP P9500 User Manual

2 To change the status of paths to Offline(C), execute the dlnkmgr
.
command's offline operation.
The paths to be placed Offline(C) can be specified by using a CHA port,
single path, or HBA port WWN. For details on how to specify paths, see
offline (Places Paths Offline) on page
For example, to place a specific path offline, execute the HDLM
command's offline operation with the -pathid parameter specified. The
following is an example of executing the command:
>dlnkmgr -s host-name -u user-name -p password offline -pathid
000001
KAPL01052-I The currently selected paths will be changed to the
Offline(C) status. Is this OK? [y/n]:y
KAPL01053-I If you are sure that there would be no problem when
the path is placed in the Offline(C) status, enter y. Otherwise,
enter n. [y/n]:y
KAPL01061-I 1 path(s) were successfully placed Offline(C); 0
path(s) were not. Operation name = offline
>
3 Check to see if the statuses of all the applicable paths have changed.
.
The following is an example of executing the command:
>dlnkmgr -s host-name -u user-name -p password view -path

Viewing LU Information

This section explains how to display LU information by using an HDLM
command.
To display LU information, execute the dlnkmgr command's view operation
with the -lu parameter specified. The following is an example of executing
the command:
>dlnkmgr -s host-name -u user-name -p password view -lu
Product
SerialNumber
LUs
iLU HDevName
0191 t10.HITACHI_770101520191 000000 Online
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
>
For details on the displayed items and their descriptions, see
Information) on page
4-4
: SANRISE_AMS
: 77010152
: 1
6-22.
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for VMware(R))
6-7.
PathID Status
000001 Online
view (Displays