Paper Selection - Kyocera 1102H03NL0 Advanced Operation Manual

Copying Functions

Paper Selection

Selecting the Cassette
1-4
Select the paper source that contains the required paper size.
NOTE:
Specify in advance the size and type of the paper loaded in the
cassette (refer to Original/Paper Setup on page 6-6).
Use the procedure below to select the paper supply cassette.
1 Place the originals on the platen.
2
Press the Copy key.
3 Press [Org./Paper/Finishing] and then [Paper Selection].
4 Press the key of the paper source corresponding to the required paper
size. The cassette in which the paper is loaded is selected.
If [Auto] is selected,
the paper matching
the size of the
original is selected
automatically.
5 Press [OK].
6 Press the Start key to start copying.
Ready to copy.

Paper Selection

Press [OK] to display
the image.
:
Original - - -
:
Zoom 100%
Send : - - -
Add Shortcut
Status
ADVANCED OPERATION GUIDE
Copies
1
Auto
Letter Letter
Plain Plain
Ledger
MP Tray
Plain Setting
Letter
Plain
Letter
Plain
Cancel OK
10/10/2007 10 :10