Programmed Copying
Registers combinations of up to eight copy modes and functions displayed on the operation panel
as a single program. After registering sets of frequently used functions as a single program, you can
simply press the program number as needed to recall those functions. You can also name the
programs to identify them.
Registering Programs
Follow the steps as below to register programs.
1
Access the copy mode to register (e.g., five sets of copies, Sort mode, or Margin mode) and press
[Program].
2
Press [Register].
3
Press a number (1 to 8) for the program
number.
4
Enter the program name and press
[End].
NOTE: For instructions on entering
characters, refer to Entering
Characters on Touch Panel on
page 3-55.
5
Press [Yes] to register the program.
to copy.
User choice
Function
Register present setting
Select program number.
No registration
No registration
No registration
No registration
No registration
No registration
No registration
No registration
Name to display
Capital
Letter
Num./Sym.
Register program.
Program #
Program name
The set program is registered. Is it correct?
Yes
Copying Functions
Paper Size
Set
11x8½"
100%
Reg./Delete
4 in 1
Register
Margin
Left
Sheet
Delete
Erase
Change
Name
Program
Stop
Limit:16 letters including #
AllDel.
Space
No
1-57