Programmed Copying; Using Programs To Copy - Kyocera KM-C2520 Advanced Operation Manual

Programmed Copying

Press the program number (1 to 8) to recall the program. After registering sets of frequently used
functions as a single program, you can simply press the program number as needed to recall those
functions. You can also name the programs to identify them.
Registering Programs
Follow the steps as below to register a program.
1
Access the copy mode you would like to register and press [Program].
2 Press [Register].
3 Press the number (1 to 8) of the program
to register.
4
Enter the program name and press [End].
NOTE: Refer to Character Input Method on page 7-47 for how to enter text characters.
5 Press [Yes]. The program is registered.

Using Programs to Copy

Press the number (1 to 8) of the program to use for copying.
1
Press [Program].
2 Press the button for the desired program
number (1 to 8).
3
Place the original and press the Start key. Copying begins using the configured program.
Editing Program Names
Follow the steps as below to edit the names assigned to registered programs.
1 Press [Program].
2
Press [Change Name].
Register present setting
Select program number.
No registration No registration
No registration No registration
No registration No registration
No registration No registration
Ready to copy. (
Recall
abc list d
list a
list b file 1
list c file 2
Basic User choice Function
Copy Functions
Paper Size
Full-Color )
Reg./Delete
Register
Delete
Change
Name
Color func. Program
11×8
100%
1-55