Proof Mode - Kyocera KM-8030 Advanced Operation Manual

Proof Mode

Delivers a single copy of a high-volume copy job to check before approving the job. If there are any
problems with the copy, simply cancel the job to avoid wasting paper.
Follow the steps as below to check a single copy in a job.
1 Press [Function] and then [
2 Press [Proof Copy] ([Test Copy]).
3
Press [On].
4 Place the originals in the document processor or on the platen. Press the Start key to deliver a test
copy.
5
After delivering the test copy, the
confirmation screen will be displayed.
The copier will remain in standby mode
until the job is approved or cancelled.
Check the test copy.
If it is acceptable, press the Start key to
deliver the specified quantity.
To change the copy quantity, press
[Change Preset].
If there is a problem with the copy, press [Cancel] to redo the copy settings.
Down].
Ready to copy.
Auto
Rotation
EcoPrint
Repeat
Copy
Basic
Ready to copy.
Proof Copy
Off
On
f copy.
d retry, press "Cancel" key.
e to print, press "Start" key.
APS
Copying Functions
OHP Memo
Proof Copy
Backing Pages
Orig. Set Mirror
Invert
Direction Image
Select of Staple Multi-Page
Output /Punch Form
User choice Program
Function
Shortcut
Proof copy outputs one set for proofi
Output
Count/Set
11x8½"
Plain
1 sided
Sort
Left tray
Change
Preset
Paper Size
11x8½
100%
Up
Down
Paper Size
11x8½
100%
Back
Cancel
1-41