Operator Information Panel; Rear View - Lenovo ThinkServer TS200 Hardware Maintenance Manual

Hard-disk drive activity LED: When this LED is flashing, it indicates that a hard disk drive is in use.
System-locator LED: Use this LED to visually locate the server among other servers.
System-information LED: When this LED is lit, it indicates that a noncritical event has occurred.
System-error LED: When this LED is lit, it indicates that a system error has occurred.
USB 1 and 2 connectors: Connect USB devices to these connectors.
DVD-eject button: Press this button to release a CD or DVD from the DVD drive.
Hard-disk drive status LED: On some server models, each hot-swap hard disk drive has a status LED. When
this LED is lit, it indicates that the drive has failed. If an optional RAID controller is installed in the server,
when this LED is flashing slowly (one flash per second), it indicates that the drive is being rebuilt. When the
LED is flashing rapidly (three flashes per second), it indicates that the controller is identifying the drive.
Hard-disk drive activity LED: When this LED is flashing, it indicates that the drive is in use.

Operator information panel

The following illustration shows the LEDs on the operator information panel on the front of the server.
1
System power on LED
2
Hard disk drive activity LED
3
System locator LED
4
System information LED
5
System error LED

Rear view

The following illustration shows the connectors and LEDs on the rear of the server.
.
Chapter 5 Locating Server Controls and connectors
129