Operator Information Panel - Lenovo thinksystem SR630 Maintenance Manual

Drive LED
8
Drive status LED (right)
9
Drive activity LED (left)

Operator information panel

The operator information panel of the server provides controls and LEDs.
The following illustration shows the operator information panel of the server.
Figure 7. Operator information panel
Table 3. Components on the operator information panel
1
Power button with power status LED
3
System ID button with system ID LED
1 Power button with power status LED
You can press the power button to power on the server when you finish setting up the server. You also can
hold the power button for several seconds to power off the server if you cannot shut down the server from
the operating system. The power status LED helps you to determine the current power status.
Status Color
Solid on Green
Slow blinking Green
(about one flash
per second)
Fast blinking Green
(about four
flashes per
second)
Off None
2 Network activity LED
The network activity LED on the operator information panel helps you identify the network connectivity and
activity.
Status
Solid yellow
Blinking yellow (blinking slowly, about one
flash per second)
Blinking yellow (blinking rapidly, about four
flashes per second)
Solid green
Blinking green
Description
The server is on and running.
The server is off and is ready to be powered on (standby state).
The server is off, but the XClarity Controller is initializing, and the server is not ready
to be powered on.
There is no ac power applied to the server.
Description
The drive has an error.
The drive is being rebuilt.
The RAID adapter is locating the drive.
The drive is powered but not active.
The drive is active.
2
Network activity LED
4
System error LED
Chapter 2
. 15
Server components