Updating The Dmi/Smbios Data - Lenovo ThinkServer TS200 Hardware Maintenance Manual

corresponding mapping layer. See the Advanced Settings Utility Users Guide for more details. You
can access the ASU Users Guide from the Lenovo support Web site.
a. Go to: http://www.lenovo.com/support.
b. From the Select your product list, select Servers and Storage.
c. In the Browse by product window Family: list, select ThinkServer TS200.
d. Click User's guides and manuals to link to the ASU Users Guide.
• Remote LAN access, type the command:
Note: When using the remote LAN access method to access IMM using the LAN from a client, the
host and the imm_external_ip address are required parameters.
host <imm_external_ip> [user <imm_user_id>[[password <imm_password>]
Where:
imm_external_ip
imm_user_id
imm_password
The following commands are examples of using the user ID and password default values and not
using the default values:
Example that does not use the user ID and password default values:
asu set SYSTEM_PROD_DATA.SYsInfoUUID <uuid_value> host <imm_ip>
user <user_id> password <password>
Example that does use the userid and password default values:
asu set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value> host <imm_ip>
5. Restart the server.

Updating the DMI/SMBIOS data

The Desktop Management Interface (DMI) must be updated when the system board is replaced. Use the
Advanced Settings Utility to update the DMI in the UEFI-based server. The ASU is an online tool that
supports several operating systems. Make sure that you download the version for your operating system. To
download the ASU and update the DMI, complete the following steps.
1. Download the Advanced Settings Utility (ASU):
a. Go to: http://www.lenovo.com/support.
b. From the Select your product list, select Servers and Storage.
c. In the Browse by product window Family: list, select ThinkServer TS200.
d. Click Downloads and drivers to link to the ASU program.
2. ASU sets the DMI in the Integrated Management Module (IMM). Select one of the following methods to
access the Integrated Management Module (IMM) to set the DMI:
• Online from the target system (LAN or keyboard console style (KCS) access)
• Remote access to the target system (LAN based)
3. Copy and unpack the ASU package, which also includes other required files, to the server. Make sure
that you unpack the ASU and the required files to the same directory. In addition to the application
executable (asu or asu64), the following files are required:
The external IMM LAN IP address. There is no
default value. This parameter is required.
The IMM account (1 of 12 accounts). The default
value is USERID.
The IMM account password (1 of 12 accounts).
The default value is PASSW0RD (with a zero 0
not an O).
Chapter 6
205
.
Replacing FRUs