Lenovo ThinkServer TS200 Hardware Maintenance Manual page 118

Table 5. DSA Preboot messages (continued)
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Chapter 7 "Parts listing, TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530" on page 209
to determine which components are customer replaceable units (CRU) and which components are field
replaceable units (FRU).
• If an action step is preceded by "(Trained service technician only)," that step must be performed only by
a Trained service technician.
• Go to the Lenovo support Web site at http://www.lenovo.com/support to check for technical information,
hints, tips, and new device drivers or to submit a request for information.
Message
number Component Test
202-901-xxx Memory
110
Hardware Maintenance Manual
State
Memory Stress Failed
Test
Description Action
Test failure. 1. Run the standard memory test to
validate all memory.
2. Make sure that the DSA code
is at the latest level. For the
latest level of DSA code, go to
http://www.lenovo.com/support.
3. Turn off the system and disconnect
it from power.
4. Reseat the DIMMs.
5. Reconnect the system to power
and turn on the system.
6. Run the test again.
7. If the failure remains, go to
the Lenovo Web site for more
troubleshooting information at
http://www.lenovo.com/support.