Lenovo ThinkServer TS200 Hardware Maintenance Manual page 54

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• SeeChapter 7 "Parts listing, TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530" on page 209
to determine which components are customer replaceable units (CRU) and which components are field
replaceable units (FRU).
• If an action step is preceded by "(Trained service technician only)," that step must be performed only by
a trained service technician.
Security: Userid: '%1' had %2
login failures from WEB client at IP
address %3.(%1 = user ID; %2 =
MaximumSuccessiveLoginFailures
(currently set to 5 in the firmware);
%3 = IP address, xxx.xxx.xxx.xxx)
Security: Login ID: '%1' had
%2 login failures from CLI
at %3.(%1 = user ID; %2 =
MaximumSuccessiveLoginFailures
(currently set to 5 in the firmware);
%3 = IP address, xxx.xxx.xxx.xxx)
Remote access attempt failed.
Invalid userid or password received.
Userid is '%1' from WEB browser at
IP address %2.(%1 = user ID; %2 =
IP address, xxx.xxx.xxx.xxx)
Remote access attempt failed.
Invalid userid or password received.
Userid is '%1' from TELNET client at
IP address %2.(%1 = user ID; %2 =
IP address, xxx.xxx.xxx.xxx)
The Chassis Event Log
(CEL) on system %1
cleared by user %2.(%1 =
CIM_ComputerSystem.ElementName;
%2 = user ID)
IMM reset was initiated by user
%1.(%1 = user ID)
ENET[0] DHCP-HSTN=%1,
DN=%2, IP@=%3, SN=%4,
GW@=%5, DNS1@=%6.(%1 =
CIM_DNSProtocolEndpoint.Hostname;
%2 =
CIM_DNSProtocolEndpoint.DomainName;
%3 =
CIM_IPProtocolEndpoint.IPv4Address;
%4 =
CIM_IPProtocolEndpoint.SubnetMask;
%5 = IP address, xxx.xxx.xxx.xxx;
%6 = IP address, xxx.xxx.xxx.xxx)
46
Hardware Maintenance Manual
Error A user has exceeded
the maximum number of
unsuccessful login attempts
from a Web browser and has
been prevented from logging
in for the lockout period.
Error A user has exceeded
the maximum number of
unsuccessful login attempts
from the command-line
interface and has been
prevented from logging in for
the lockout period.
Error A user has attempted to log
in from a Web browser by
using an invalid login ID or
password.
Error A user has attempted to log
in from a Telnet session by
using an invalid login ID or
password.
A user has cleared the IMM
Info
event log.
Info A user has initiated a reset of
the IMM.
Info The DHCP server has
assigned an IMM IP address
and configuration.
1. Make sure that the correct
login ID and password are
being used.
2. Have the system administrator
reset the login ID or password.
1. Make sure that the correct
login ID and password are
being used.
2. Have the system administrator
reset the login ID or password.
1. Make sure that the correct
login ID and password are
being used.
2. Have the system administrator
reset the login ID or password.
1. Make sure that the correct
login ID and password are
being used.
2. Have the system administrator
reset the login ID or password.
No action; information only.
No action; information only.
No action; information only.