Replacing The Top Cover; Removing And Replacing The Top Cover - HP rp4410 Service Manual
User service guide, fifth edition - hp 9000 rp4410/4440
Hide thumbs
Also See for rp4410:
- Installation manual (103 pages) ,
- Manual (51 pages) ,
- Programmer's manual (109 pages)
Table of Contents
Advertisement
Figure 6-5 Removing and Replacing the Top Cover
Replacing the Top Cover
To replace the top cover, follow these steps:
1.
Align the tabs at the rear of the top cover with the corresponding slots in the chassis. Fully
seat the tabs into the slots, and push the top cover forward until it seats.
2.
Using a Torx T15 driver, tighten the two thumbscrews securely.
154
Removing and Replacing Components
Advertisement
Table of Contents
Troubleshooting
