Power And Cooling; Environmental Specifications; Operating Environment; Environmental Temperature Sensor - HP rp4410 Service Manual

Power and Cooling

Table 2-6 lists power and cooling values associated with servers which contain the listed
components. These power and cooling values are considered typical and not maximum for the
configurations shown.
Table 2-6 lists the typical configuration power values for HP 9000 rp4410 and rp4440 servers.
Table 2-6 Typical Configuration Power Values
CPU Memory
Qty Gigabytes
1 1 GB (4 DIMMs
256 MB each)
1
2 32 GB
DIMMs, 1 GB
2
each)
1
2 32 GB
DIMMs, 1 GB
2
each)
1
4 32 GB
DIMMs, 1 GB
2
each)
1
4 32 GB
DIMMs, 1 GB
2
each)
1
4 32 GB
DIMMs, 4 GB
each)
4 128 GB
DIMMs, 4 GB
2
each)
1 The maximum memory capacity is 128 GB.
2 These memory configurations require the optional 32-DIMM slot memory extender board. The standard memory
extender board has 16-DIMM slots.

Environmental Specifications

This section provides the temperature and humidity requirements, noise emission, and air flow
specifications for the server.

Operating Environment

The system is designed to run continuously and meet reliability goals in an ambient temperature
of 5°C to 35°C (+40°F to +95°F) at sea level. The maximum allowable temperature is de-rated 1°C
per 1,000 feet of elevation above 5,000 feet above sea level up to 30°C at 10,000 feet. For optimum
reliability and performance, the recommended operating range is 20°C to 25°C and 40% – 55%
relative humidity.
Ambient intake air temperature is often different from ambient room temperature, You should
measure the operating temperature and humidity directly in front of the cabinet cooling air
intakes rather than just checking ambient room conditions.

Environmental Temperature Sensor

The server includes internal sensors that monitor input air temperature and server operating
temperatures. The ambient air temperature is measured using a sensor placed on the system I/O
46 System Specifications
PCI Cards DVDs
(assuming
10W each)
0 0
(32 0 0
(32 6 1
(32 0 1
(32 6 1
(8 0 1
1
(32 6 1
Hard Disk Core I/O Bulk Power
Drives Supplies
1 2 2
1 1 1
2 2 2
2 2 2
2 2 2
2 2 2
2 2 2
Typical Typical
Power Cooling
(Watts) (BTU/Hr)
410 1399.74
540 1843.56
700 2389.80
895 3055.53
975 3328.65
915 3121.98
3600 12283.2