Removing The Top Cover; Figure 7-5 Removing And Replacing The Top Cover - HP Integrity rx4640 Operation And Maintenance Manual

Step 4. If rack mounted, slide the HP Server into the rack until it stops.
Figure 7-5 Removing and Replacing the Top Cover

Removing the Top Cover

To remove the top cover, perform the following steps:
Step 1. If rack mounted, slide the HP Server out from the rack until it stops. See "Accessing a Rack Mounted Server" on
page 141.
Chapter 7
Removing and Replacing Components
Front and Top Covers
Thumbscrews
147